The iMac should be on, just sign in with your Kerberos account.

Note: The iMac doesn’t turn on any of the external equipment.

*Check that the speakers are in the off position before turning on the cabinet.*

Power switch is on the back of the right hand speaker, this controls the power to both.

Each cabinet’s power switch is on the top right and turns on the following equipment.

Workstation 1: Mixer, Speakers, and both Moog synthesizers.

Workstation 2: Mixer and Podcast Mic.

The theremin and turntable are *not* powered by the cabinet, they have their own power switches.

If using the theremin or synthesizers, let them warm for 10~ minutes before using them.

If the mixer doesn’t turn on when you turn the cabinet on, check the back right side for the power switch.

The mixers have a few ways to hear sound.

Both have headphone jacks on the front. 

If using headphones, make sure that the “Phones” volume at the top center of the mixer is turned to 9 O’Clock.

If using the speakers on workstation 1, turn the “Monitor” volume to 9 O’Clock

There is a “DIM” button, make sure this is selected to help keep the volume controlled.

Bring the faders of the channel(s) you’re using up to “0”.

Check that the Master or Main volume on the bottom right of the mixer is brought up to around “-10”.

If you want to hear playback from a DAW you’re working with, the DAW sound return is routed through channels 17 and 18. 

Bring those faders up to “-5”.